OPT 5506I IP 6 in 1 ISDB-T Modulator
1. Brief Introduction
OPT 5506I IP Mux modulator is the latest generational Mux-modulating device developed. It has 6 multiplexing channels and 6 (ISDB-T) modulating channels, and supports maximum 192 IP input through the GE ports and 6 non-adjacent carriers (50MHz~960MHz) output through the RF output interface. The device is also characterized with high integrated level, high performance and low cost.
2. Key Features
• 2 GE input, SFP interface
• Supports up to 192 IP input over UDP/RTP, unicast and multicast, IGMP v2v3
• Max 840Mbps for each GE input
• Supports up to 180 PIDS remapping per channel
• Support 6 multiplexed TS over UDP/RTP output
• 6 non-adjacent carriers output, compliant to ISDB-Tb (ARIB STD-B31)
• Support Web-based Network management
3. Technical Parameters
Input | Input |
32×6 IP input, 1000M Ethernet Port (SFP) |
Transport Protocol |
TS over UDP/RTP, unicast and multicast, IGMP V2/V3 |
|
Transmission Rate |
Max 840Mbps for each GE input |
|
Mux | Input Channel |
192 |
Output Channel |
6 |
|
Max PIDs |
180 per channel |
|
Functions |
PID remapping (auto/manually optional) |
|
PCR accurate adjusting | ||
PSI/SI table automatically generating | ||
Modulation Parameters |
Standard |
ARIB STD-B31 |
Bandwidth |
6M |
|
Constellation |
QPSK,16QAM, 64QAM |
|
Guard Interval |
1/32, 1/16, 1/8, 1/4 |
|
Transmission Mode |
2K, 4K, 8K |
|
Code rate |
1/2, 2/3, 3/4, 5/6, 7/8 |
|
MER |
≥40dB |
|
RF frequency |
50~960MHz, 1KHz step |
|
RF output level |
-20dBm~+10dBm(87~117dbµV), 0.1dB stepping |
|
RF Output | Interface |
1 F typed output port for 6 carriers, 75Ω impedance |
ACLR |
-50 dBc |
|
TS output | 6 IP output over UDP/RTP, unicast/multicast, 1000M Ethernet Ports |
|
System | Network management software (NMS) supporting |
|
General | Dimension |
420mm×440mm×44.5mm (WxLxH) |
Weight |
3kg |
|
Temperature |
0~45℃(operation), -20~80℃(storage) |
|
Power Supply |
AC 100V±10%, 50/60Hz or AC 220V±10%, 50/60Hz |
|
Consumption |
15.4W |
http://www.ftthtec.com/